INSTRUCTIONS
FOR PART #'s 20-2591 & 20-2592 (SC10 SHOWN)
 A
B
 C
D
1. Clean the side area
of the chassis with rubbing alcohol until all dirt and debris are
removed.
2. Apply the adhesive backed VelcroŽ all
the way around the chassis and across the rear shock
mount as shown in
figures A, B, & C. Allow 24 hours for the adhesive to set.
3. Install the Outerwears shroud and fasten
to the VelcroŽ on the chassis as shown in figure D.
|